This was one of my first U2 covers many years ago. Recorded in ProTools with Line 6 Pod Pro and Strat in bridge position. Key to this song is the Tube Drive on the Line 6 units and tele bridge into Fender amp model:
This was one of my first U2 covers many years ago. Recorded in ProTools with Line 6 Pod Pro and Strat in bridge position. Key to this song is the Tube Drive on the Line 6 units and tele bridge into Fender amp model:
U2GTAdministrator
I think so. I used the Axe on my Vertigo cover/tutorial on YouTube. I have a line 6 M5 so I will update my Tube Drive model by comparing them closely and making any adjustments. I'm positive I can get it to the point where someone can't tell the difference. Amp model makes a big difference. Tube Drive needs to be into a Fender model. Edge doesn't use his AC-30 for this song.
U2GTAdministrator
I have a good tube drive for Ultra, but is not 100%. The Tubre drive from Line 6 is something else, very warm
Very nice michael !
I don't really understand reading your post if you used a strat or a telecaster, but it doesn't matter !!
Thanks for the information on the fender amp
hi Manu Michael stated strat in bridge position in the top post
all the best
--
Rewddog - AxeFX2 Presets and Cabs available at Fractal Audio Axechange - Rewddog
https://soundcloud.com/rewddog
(I just asked because he spoke too in the second sentence about tele bridge into fender amp )
I didn't own a Tele when I did this recording, so I used Strat in bridge position. For the tutorial I used my Tele in bridge. Edge uses a Tele as you know.
U2GTAdministrator
All is crystal clear now !
I did this video awhile ago (2 years) trying to cop the Milan sound. I think it is pretty close and is all Axe-FX direct into reaper. Was the Axe-Standard. I should record a clip with the sound I have on the II sometime. I think the breakup is a little clearer.